• Facebook
  • LINE
  • Twitter
  • LinkedIn

News

NP7//N5X/Miniature

2013/5/17
..........
NP7 N5X Miniature
 
NP7:
P/N : NP7 T4.83*2.29*2.54-P
Turns：0.1φ ,28Ts
Temperature：100KHz,100mV		 Figure：NP7 Toroids Core
Size：OD：4.83mm
　　　ID ：2.29mm
　　　HT：2.54mm
 
 
P/N : NP7 T4.4*1.78*2.15-P
Turns：0.1φ ,26Ts
Temperature100KHz,100mV		 Figure：NP7 Toroids Core
Size：OD：4.4mm
　　　ID ：1.78mm
　　　HT：2.15mm
 
N5X:
N5X is a material Mn-Zn ferrite.Which was developed for LAN Applications specially 100 BASE TX. The permeability is typically 4400,and Incremental permeability is controlled over temperature ranging from 0℃ to 70℃ .It also have excellent low temperature stable In inductance characteristic until (-40 ℃ temperature )Please refer the below typically available size of toroidial core DATA curves for your designing reference. Customer made is available.Welcome to contact us.
 
 
P/N：N5X T3.05x1.68x2.2-P
 Turns：24Turns
Temperature：0~70℃		 Figure：Toroidal Cores
Size：OD：3.05mm
　　　ID ：1.68mm
　　　HT：2.2mm
 
P/N：N5X T3.5x1.7x2.07-P
Turns：2２Turns
Temperature：0~70℃		 Figure：Toroidal Cores
Size：OD：3.05mm
　　　ID ：1.8mm
　　　HT：2.07mm
 
P/N：N5X T4.4x1.78x0.85-P
 Turns：30Turns
Temperature：0~70℃		 Figure：Toroidal Cores
Size：OD：4.4mm
　　　ID ：1.78mm
　　　HT：0.85mm
 
P/N：N5X T2.54x1.27x2.54-P
Turns：24Turns
Temperature：0~70℃		 Figure：Toroidal Cores
Size：OD：2.54mm
　　　ID ：1.27mm
　　　HT：2.54mm
 
P/N：N5X T2.54x1.27x2.79-P
Turns：24Turns
Temperature：0~70℃		 Figure：Toroidal Cores
Size：OD：2.54mm
　　　ID ：1.27mm
　　　HT：2.79mm
 
P/N：N5X T3.05x1.27x2.07-P
Turns：24Turns
Temperature：0~70℃		 Figure：Toroidal Cores
Size：OD：3.05mm
　　　ID ：1.27mm
　　　HT：2.07mm
 
Miniature:
Miniature power inductor used Drum core. All these Drum cores are designed for high current SMD low profile power inductor. They are made with two series of material Mn-Zn ferrite & nickel-Zn. Both materials have high Bs. Low losses characteristic.
All these Mn-Zn Drum cores made with parylene coating. The heights of these Drum cores are ranges from 0.9mm to 2mm. below table are ENCORE'S standard for your reference.
Customer made is available. Welcome to contact us.
 
 
 
CORES SERIES
ITEM
FIG
ITEM
FIG
NP1 DR 4.0 x 1.4 (0.6~1.5)
1
NP1 DR 4.04 x 1.1 (0.5~1.5)
1
NP1 DR 4.0 x 2.0 (1.2~1.5)
1
NP1 DR 4.04 x 1.1 (0.5~2)
1
NP1 DR 4 x 3 x 2 (1.2~1.2)
2
NP1 DR 4.04 x 1.4 (0.5~1.2)
1
NP1 DR 4.04 x 0.9 (0.3~1.7)
2
NP1 DR 4.04 x 1.4 (0.6~1.7)
1
NP1 DR 4.04 x 0.9 (0.3~2)
1
NP1 DR 4.83 x 4.0 (2.4~2.7)
1
NP1 DR 4.04 x 1 (0.3~1.2)
1
NP1 DR 6.2 x 5 x 1.4 (2.4~2.7)
2
NP1 DR 4.04 x 1 (0.3~2.0)
1
 
 
 
 
 

Previous Page

Contact Us